For a studio with steel-frame reformers, the Hegren Reformer TALMA 62 is the top choice; for a combined reformer-tower concept, the Elina Pilates Elite Advanced; and for flexible space utilization, the Elina Pilates HL2. For any reformer-jumpboard combination in 2026, the rule is: First, have the exact accessory configuration confirmed, then place the order.
- Kraftathlet: Select Reformer-jumpboard combinations based on model compatibility, not on similar appearance.
- Hegren TALMA 62 is suitable for a studio setup with a steel frame; order the TALMA Jumpboard separately.
- Elina Pilates Elite Advanced with Tower fits into a combined equipment concept; the Jumpboard configuration remains open.
- Elina Pilates HL2 is suitable for flexible use of space thanks to its stackable or vertical storage options.
Why the combination is more important than any single device
A jumpboard is a platform attached to the Reformer. It expands the machine’s capabilities to include exercises in which you push off the platform with your feet, moving the carriage against the set spring resistance. The exercises and settings that are permitted depend on the instructions for the specific combination.
When purchasing equipment for a studio, simply asking about the Reformer isn't enough. You need a clear correspondence between the base unit, the Jumpboard, and the mounting hardware. A matching product name is a starting point, but it's no substitute for confirmed model approval.
Kraftathlet is suitable for studio operators who are planning to purchase Reformer Jumpboard equipment, including delivery, installation, and follow-up service. The configuration specified in writing remains the basis for the order. Furthermore, a Reformer with a tower is not automatically a Reformer with a Jumpboard.
What Makes a Good Reformer-Jumpboard Combination
For the 2026 selection, these criteria take precedence over additional accessories. The order deliberately starts with fit rather than frame material.
- Model Matching: The jumpboard must be designed for the specific Reformer model. The manufacturer's name and similar dimensions are not sufficient.
- Mounting: The mounting bracket, locking mechanism, and installation procedure must be included in the documented configuration.
- Course Overview: Check how to switch between the foot bar and the jumpboard, and where the accessories are located during other exercises.
- Space Planning: In addition to the dimensions of the equipment, take into account movement areas, classroom activities, and storage.
- Operation: Clarify training, maintenance, replacement parts, and contact information before placing an order.
A difference between two reformers is only significant if it affects your business. For example, a tower expands the equipment concept. However, it doesn't answer the question of which jumpboard you're allowed to use with it.
The Selection at a Glance
The following ranking categorizes three basic units according to different use cases. It is not a list of confirmed complete sets that include a jumpboard. Where an assignment is missing, it is explicitly noted in the table as an open configuration point.
| Rank and Base Unit | Particularly suitable for | Assigned Attribute | Limits of the Selection | Jumpboard Assignment |
|---|---|---|---|---|
| 1. Hegren TALMA 62 | Studio with a Steel-Frame Design | Steel frame; dimensions 240 × 68 × 38 cm | Separate planning of accessories and storage is required | TALMA Jumpboard is listed separately; approval of the specific combination: [INFORMATION REQUIRED] |
| 2. Elina Pilates Elite Advanced Reformer with Tower | Combined Reformer-Tower Concept | Rock Maple; longitudinally adjustable footrest; height 197 cm | A tower is no substitute for a jumpboard | Compatible jumpboard and package contents: [INFORMATION REQUIRED] |
| 3. Elina Pilates HL2 Reformer without Tower | A space with varying uses | Aluminum; 240 × 71 cm; stackable or can be stored vertically | Accessories must fit into the storage plan | Appropriate jumpboard and approval: [INFORMATION REQUIRED] |
This order is intended to help you make a decision based on your specific use case. If you don’t need a tower, there’s no practical reason to choose the tower model just because it comes with additional features. On the other hand, if you put your equipment away after every session, you’ll need to consider storage when selecting your basic equipment.
1. Hegren TALMA 62: for a studio with a steel-frame design
The Hegren TALMA 62 is a studio reformer with a powder-coated steel frame. The listed dimensions of the machine are 240 × 68 × 38 cm. The lying surface is 62 cm wide; the listed weight capacity is 220 kg.
The specific starting point for planning your accessories is the TALMA Jumpboard (Hegren ), which is listed separately. The shared model number makes this accessory an obvious point of reference. It does not replace confirmation of the specific Reformer model you ordered.
TALMA-62 Benefits: The steel frame is based on a clearly defined material concept. Its dimensions and load capacity provide you with concrete criteria for selecting equipment. A jumpboard specifically designated as TALMA can be included in the configuration request, rather than simply asking for a jump surface in general terms.
TALMA-62 Limitations: The jumpboard is listed as a separate item; therefore, there is no confirmed standard scope of delivery. Compatibility, mounting, and specific approval of the combination must be clarified before placing an order. Furthermore, the equipment dimensions alone do not account for the space requirements of a fully equipped course area.
Particularly suitable for: Operators who want to equip a studio with steel-frame reformers and specify the corresponding accessories as a set. To ensure a cohesive equipment layout, you should also consider the padding, accessory storage, and the transition between class formats as a whole.
Purchase Recommendation: Request a configuration; do not approve the order until the Jumpboard assignment has been confirmed. The TALMA 62 is the top choice here for the steel-frame concept, not the one-size-fits-all winner for every studio.
2. Elina Pilates Elite Advanced with Tower: for a combined design
The Elina Pilates Elite Advanced with Tower combines a reformer made of rock maple with an integrated tower. The footbar can be slid along the entire length of the reformer. This model is specified to have 6 reformer springs, 8 tower springs, and a total height of 197 cm.
Choose the Elina Pilates Elite Advanced with Tower if your classes actually incorporate both of these functions. This is a different purchasing decision than simply adding a jumpboard to a Reformer. The Tower should have a designated place in your class schedule.
Elite-Advanced Benefits: The Reformer and Tower are integrated into a single station. The longitudinally adjustable footbar is a key feature. Frame material, number of springs, and overall height can be incorporated into the technical planning without having to draw conclusions from general product images.
Elite-Advanced Limitations: The tower equipment is not compatible with jumpboards. A suitable jumpboard is not specified in the product information provided: [INFORMATION REQUIRED]. In addition to floor planning, you must take into account the equipment height and the intended movements on the tower.
Particularly suitable for: Studios and private lessons with a specifically planned Reformer Tower concept. If your offerings primarily consist of Jumpboard classes, first decide on the confirmed jumping surface and only then consider adding a Tower.
Purchase Recommendation: Hold off until the appropriate jumpboard has been specified and the combination confirmed. The included tower equipment makes the Elite Advanced a suitable choice for combined formats, but not necessarily the right jumpboard solution.
3. Elina Pilates HL2: for flexible use of space
The Elina Pilates HL2 (without tower) features a reinforced frame made of anodized aluminum. Its dimensions are 240 × 71 cm; it is rated for 5 springs and a user weight of up to 150 kg. The model is stackable or can be stored vertically.
These storage options are relevant for rooms that are not permanently used as reformer spaces. Don't just plan for the main equipment. A removed Jumpboard also needs a designated spot that won't get in the way of setting up the next class.
HL2 Benefits: The product specifications explicitly list two storage options. Dimensions and user weight provide you with clear selection criteria. The version without the tower separates the decision on the base unit from that of adding a tower accessory.
HL2 Limitations: An assigned jumpboard is not specified in the information provided: [INFORMATION REQUIRED]. Furthermore, stackability does not mean that accessories may remain attached. The instructions for the respective equipment and accessory configuration apply.
Particularly suitable for: Facility operators with multipurpose rooms who need to specifically organize the transition between Reformer classes and other uses. Check the entire process from the end of the class until the room is cleared, including all accessories—not just the vertical storage position of the Reformer.
Purchase recommendation: Keep in mind for flexible space utilization; postpone purchasing the Jumpboard until its assignment is confirmed. Storage is the main selling point of the HL2. A complete Jumpboard configuration must be specified separately.
This is how an orderable configuration is created
For your 2026 procurement, you should turn a general list of equipment into a specific order description. Start with the exact model name and version. Then add the corresponding jumpboard, mounting hardware, and the agreed-upon scope of services.
Specify Model
Make a note of the base unit, model, and required accessories. For existing reformers, the nameplate, purchase documents, and photos of the accessory mount will help ensure your inquiry is clear. A verbal description such as “an Elina reformer” is too vague for this purpose.
Confirm Accessories
Make sure you are assigned the specific Jumpboard with its product code. The confirmation should clearly indicate which model it applies to. Similar-looking images or a matching brand name are not sufficient grounds for placing an order.
Check the room
Mark the location of the main unit on your floor plan and add the designated teaching and exercise areas. Also plan where the folded-up Jumpboards will be stored. The manufacturer's dimensions describe the equipment itself, not necessarily the entire workspace in the studio.
Arrange a handover
Specify which installation tasks and which training sessions are included in the handover. Also document the contact person for future inquiries and replacement parts. At Kraftathlet , coordinating delivery, on-site installation, and follow-up service is part of the quoted package for studio equipment.
What You Should Test in Practice at the Studio
A product comparison doesn't end with the materials and the number of springs. Ask for a demonstration to see how the Jumpboard is used, set up, and taken down. Evaluate the process from the perspective of your class instructor, not just from a purchasing standpoint.
Also, make sure that the equipment has a designated storage location during other parts of the class. A solution is not fully planned until the transition between formats remains clear. Storage locations and access should therefore be included in the same floor plan as the Reformers.
The demonstration is not a substitute for the instructions. Have the permitted uses, assembly, and required inspections explained to you based on the specific equipment documentation. Do not apply settings from another model to your setup without first verifying them.
How the 2026 rankings will be determined
The classification is based on documented product characteristics and distinguishes between three use cases: steel-frame studio, Reformer Tower concept, and flexible space utilization. The TALMA 62 is the primary model for the steel-frame concept. The Elite Advanced with Tower and the HL2 each address a different planning scenario.
Unconfirmed characteristics such as noise level, durability, or change speed are not evaluated. Nor can a universal Jumpboard fit be inferred from the product names. For this reason, the selection expressly does not include a blanket approval of the three combinations.
Which combination should you choose?
For a newly planned steel-frame studio, the Hegren TALMA 62 with a separately assigned TALMA Jumpboard is the concrete starting point. Have the combination confirmed before you order it as a recurring course space. This ensures that the equipment decision remains aligned with future operations.
The Elina Pilates Elite Advanced with Tower is a good fit if your class plan includes both a Reformer and a Tower. The Elina Pilates HL2 is a good fit if storage and multipurpose use are your top priorities. For both models, you’ll need to clearly specify the appropriate Jumpboard before making your purchase decision.
Request a configuration at Kraftathlet that includes the specific Reformer model, the corresponding Jumpboard, delivery, and installation. To do so, specify your intended use, the number of stations you plan to install, and the location. This provides a clearer basis for a quote than simply requesting a Reformer with as many accessories as possible.
FAQ
Which reformer with a jumpboard is best suited for a new Pilates studio?
For a steel-frame design, the Hegren TALMA 62 with a separately assigned TALMA jumpboard serves as the specific starting point for this selection. The exact combination must be confirmed before placing an order; the shared model designation alone does not constitute this confirmation.
Does every jumpboard fit every Pilates reformer?
No, a jumpboard must be compatible with the specific Reformer model and its mounting system. Have the compatibility confirmed based on the exact model and accessory names.
Does the Elina Pilates Elite Advanced with Tower come with a jumpboard?
The included jumpboard is not confirmed in the available specifications for the " Elina Pilates " Elite Advanced with Tower. Be sure to confirm the complete list of included items and compatible accessories in writing before placing your order.
Which air conditioner is best suited for a multipurpose room?
The Elina Pilates HL2 without a tower is a suitable choice for flexible room use thanks to its stackable or vertical storage options. For a jumpboard setup, accessory placement and storage must be addressed separately.
Can I retrofit a Jumpboard onto existing Reformers?
Retrofitting requires a Jumpboard designed specifically for your Reformer model. Please have the model number, equipment documentation, and photos of the accessory mount ready for identification.
How much space does a Reformer with a jumpboard take up?
The space required depends on the base unit, the installed configuration, and the intended use. For example, the TALMA 62 measures 240 × 68 × 38 cm; these unit dimensions do not constitute a complete specification of the area required for a course.
Are there any additional checks I need to perform on a tower reformer?
When using a tower reformer, you need to consider not only the floor space but also the machine's height and the intended movements. The Elina Pilates Elite Advanced with Tower is listed as having a total height of 197 cm; compatibility with the Jumpboard must be verified separately.
Finally: Plan the takedown just as carefully as the setup
When planning your studio for 2026, one simple question is particularly useful: Where is each Jumpboard located when it’s not in use? The answer belongs in the equipment list and the floor plan. An approved piece of equipment without a designated storage location does not yet constitute a fully planned class space.