
Force USA MyRack Power Rack Base – modular and expandable with over 20 attachments: statically tested to 900 kg, 54 Westside holes, 140 × 120 × 220 cm
- Response innerhalb von 48 Stunden
- Finanzierung Mietkauf und Leasing für Studios
- Message us on WhatsApp




Darauf kommt es an.
Modular
Static load tested to 900 kg
54 numbered holes
60 × 60 mm posts
Freestanding or bolted to the floor
Olympic bar holder included
Passt es in deinen Raum?
Die Maße vorab, damit du Stellfläche und Laufwege planen kannst.
The Force USA MyRack Power Rack Base is the starting point for a rack that you assemble yourself. You can add pull-up bars, J-hooks, safeties, dip handles, a lat pulldown, cable crossover, or monolift. The posts measure 60 × 60 mm and are made of 2.3 mm steel, with 54 numbered holes at Westside spacing for easy adjustment. The rack has been statically tested to support up to 900 kg.
Key Benefits
- Modular – over 20 attachments available from the manufacturer
- Statically tested to 900 kg
- 54 numbered holes – Westside spacing
- 60 × 60 mm posts – 2.3 mm steel
- Freestanding or bolt-down
- Olympic bar holders included
Who It Is Best For
Best suited for home gyms and small training rooms where you want to start with a basic rack and expand it step by step.
Additional Technical Details
- Static load: tested to 900 kg
- Posts: 60 × 60 mm, 2.3 mm steel (12 gauge)
- Supports: 3 mm steel (10 gauge)
- Hole spacing: Westside, 54 adjustment points front and back, numbered
- Hole diameter: 15 mm
- Manufacturing: laser-cut, robot-welded
- Stability: flat base feet, rear stabilizer
- Setup: freestanding or floor-mounted
- Intended use: semi-professional (manufacturer specification)
As of 09/2026
Applications
Squats, bench press, deadlifts, Olympic lifting, and calisthenics – depending on the attachments, it can also be used for lat pulldowns, dips, and cable exercises.
Comparison with the Sister Model
The Force USA MyRack SpaceSaver uses the same accessory system but can be folded up in less than 10 seconds.
Matching Accessories
- Force USA MyRack Chin Up Option 1
- Force USA MyRack Safety Option 4
- Force USA MyRack Lat Pulldown Accessories
- Force USA MyRack Weight Plate Holders
- Force USA MyBench V2
Frequently Asked Questions (FAQ)
What should I start with?
The manufacturer recommends starting with at least one pull-up bar, a pair of J-hooks, and one safety option. You can add more attachments later.
Do I need to bolt the rack to the floor?
No. You can use it freestanding or bolt it to the floor.
Why are the holes numbered?
This allows you to remember the height for J-hooks and safeties for each exercise and set them without having to test them during your next workout.
Du planst ein Studio? Wir planen mit.
Schick uns Grundriss, Fotos oder nur die Maße und sag uns, was du vorhast. Wir melden uns innerhalb von 48 Stunden.




