Buying a Hyperbaric Oxygen Chamber: A Guide for Clinics, Studios, and Longevity Centers

Four factors determine which hyperbaric oxygen chamber is the right choice: the pressure level (ATA), the design (hard-shell or soft-shell), the capacity (1 to 4 people), and the required certification. Anyone equipping a studio, clinic, or longevity center is making an investment decision that will last for years—this guide provides a structured overview of each of these key factors.

Hyperbaric oxygen therapy (HBOT) has evolved from a niche clinical procedure into an integral part of elite sports, longevity medicine, and premium wellness. Professional athletes such as LeBron James and Cristiano Ronaldo have publicly documented their use of it for recovery, and more and more recovery and longevity centers are building their services around the hyperbaric chamber. It is precisely this commitment to premium quality that determines the choice of equipment.

What is a hyperbaric oxygen chamber?

In a hyperbaric oxygen chamber, users breathe oxygen at elevated ambient pressure. The higher pressure—measured in ATA (atmospheres absolute)—ensures that significantly more oxygen is physically dissolved in the blood plasma than would be possible at normal pressure. Depending on the protocol, a session typically lasts 60 to 90 minutes.

Important to note: As a recognized therapeutic method, hyperbaric oxygen (HBO) therapy is reserved for specific medical indications and must be administered under medical supervision—the Society for Diving and Hyperbaric Medicine (GTÜM), for example, provides an overview of the recognized indications. This guide covers equipment selection, technology, and procurement for recovery, wellness, and longevity applications, as well as professional use under expert supervision—it does not make any claims of healing.

What Is HBOT Used For? An Honest Assessment

In the context of recovery and wellness, HBOT is primarily used for regeneration. The research findings are promising but nuanced—and it is precisely this honesty that builds trust among discerning clients:

• Sports & Recovery: A meta-analysis on exercise-induced muscle damage found that HBOT can accelerate recovery (systematic review, PubMed). However, the evidence regarding a pure performance boost before or after exercise is mixed—standardized protocols are still lacking.
• Longevity & Cellular Aging: A widely cited study by Prof. Shai Efrati (Aging, 2020) observed longer telomeres and fewer senescent cells in healthy adults over the age of 64 after 60 sessions (Aging-US, NCBI). This is a small, controlled study—a research finding, not a promise.
• Wellness & Well-Being: Many users report feeling more rested and having more energy. While such personal experiences do not constitute medical proof of efficacy, they are relevant to the premium wellness experience.

From a sales perspective, this means: position the chamber as an experience focused on recovery, performance, and longevity—and leave specific medical indications to the doctor’s consultation.

Hard-Shell vs. Soft-Shell: The Fundamental Decision

The first distinction is the design. Soft-shell chambers are flexible, portable, and operate at lower pressures; hard-shell chambers are rigid, pressure-stable systems designed for higher ATA values and continuous operation.

Characteristic	Soft-Shell	Hard-Shell
Print Range	approx. 1.2–1.5 ATA	2.0–2.4, optionally 3.0 ATA
Construction Method	flexible case, portable	rigid, pressure-resistant body
Typical Applications	Home, Getting Started, Rehab	Studio, Clinic, Longevity Center
Experience	compact, portable	Panoramic Windows, Entertainment, Premium
ProReset Models	Flow, Oasis, Space	Orbit, Vista, Zeugma, Atlantis

For professional, continuous use with premium requirements, the best option is almost always a hard-shell chamber—such as the ProReset Orbit 2.0 ATA. For home users, rehabilitation, and mobile applications, soft-shell systems like the ProReset Oasis or the wheelchair-accessible ProReset Space are the more economical choice.

Understanding ATA Pressure Levels

The pressure determines the operating depth, weight, construction complexity, and certification process. A higher ATA rating isn't automatically "better"—it has to be appropriate for the intended use.

Compression stage	Typical Uses	Note
1.3–1.5 ATA	Wellness, Getting Started, Home Recovery	"mild HBOT," lower weight
2,0 ATA	Gyms, recovery centers, and many wellness clinics	Most Common Premium Standard
2,4 ATA	Demanding clinical and longevity settings	Noticeably stronger, significantly heavier
3,0 ATA	medical indications	Requirements for medical CE, physician-led

Real-world example from the installation site: A hyperbaric chamber weighs about 400 kg at 2.0 ATA and about 700 kg at 2.4 ATA. The increase from 2.0 to 2.4 may seem small, but it has a significant impact on performance, design, and structural integrity—this must be factored into every design.

Sitting or lying down, 1 or 2 people?

The design determines comfort, throughput, and floor space. Treatment rooms like the ProReset Vista 2.0 ATA, with three large panoramic windows, feel open and alleviate claustrophobia—a real selling point. The transparent, modular ProReset Zeugma can be disassembled on site and brought into existing rooms through a standard 80-cm door—ideal for established practices.

If you want to treat two people at the same time or accommodate couples or companions, choose the ProReset Atlantis (2 seats, individual oxygen supply for each, panoramic window, entertainment system). For group sessions and high throughput, there’s even a 4-person version available: the ProReset Mediterranean. All models are available as part of the Hyperbaric Oxygen Therapy collection.

Oxygen Supply & Technology

One often underestimated difference in quality lies in the oxygen delivery. High-quality systems use a BIBS mask with two tubes: one delivers oxygen, while the other completely removes exhaled air—ensuring that no CO₂ is rebreathed. When combined with a high-performance concentrator (up to about 20 liters per minute at 93% oxygen instead of the usual 5–10 liters), the efficiency of the session increases significantly. Two modes—free oxygen flow and oxygen on demand (as in scuba diving)—can be selected depending on the patient’s needs. If a clinic has its own oxygen supply, it can be connected directly.

Panoramic windows and a built-in entertainment system ensure a premium experience: The screens are powered directly by electricity (no batteries in the chamber—a deliberate safety feature), so users can enjoy movies or music without the risk posed by batteries.

Space Requirements, Delivery & Installation

Especially in the B2B sector, projects rarely fail because of the chamber itself, but rather because of the planning of the installation site. You should clarify the following points early on:

• Structural Analysis: Depending on the pressure rating, a hard-shell chamber weighs between 400 and 700 kg (multi-person models weigh correspondingly more). The ceiling and floor loads must be verified by an architect.
• Access: Modular chambers such as Zeugma are designed to fit through a standard door (approx. 80 cm) and be assembled on site—without having to open any walls.
• Safety: Fire safety and oxygen handling are regulated differently depending on the country and intended use. The most important safety measure is a certified chamber manufactured to strict standards.
• Delivery time: ProReset chambers are custom-made (produced in Istanbul, among other locations)—please allow approximately 8 to 12 weeks; each chamber is one-of-a-kind.
• All-inclusive package: Delivery, installation by certified technicians, training for your team (operation, safety, maintenance), and annual maintenance are all included in the offer.

Certification: Medical or Wellness?

The certification issue determines both usage and billing. A medical CE mark allows the device to be operated as a medical device (relevant, for example, for billing private insurance companies)—but requires a design pressure of 3.0 ATA and entails stricter regulatory requirements. In contrast, many wellness and recovery operators deliberately use 2.0 ATA chambers without making any medical claims and position their offerings as “premium recovery.” Which approach is right for you depends on your business model—be sure to clarify this before selecting a model.

Which Model Is Right for You? Buying Guide

User	Recommendation	Format
Personal / Home Recovery	Flow, Oasis, Space	Soft-shell, sitting/lying down
Gym / Wellness	Vista, Zeugma	Hard-shell, seated, panoramic
Clinic / Longevity Center	Atlantis, Zeugma, Orbit	Hard-Shell, 1–2 people
Groups / High Throughput	Mediterranean	up to 4 people

ProReset chambers are custom-built, one-of-a-kind units: You can customize the exterior and interior colors, the interior design, panoramic windows, entertainment features, and even your own branding—upon request, you’ll receive photorealistic renderings of your chamber in advance. These systems are installed in clinics and private residences throughout Europe. As an authorized ProReset dealer, we support you every step of the way—from model selection and structural analysis to installation, training, and annual maintenance.

Pricing: Since each chamber is custom-configured, we calculate the price on a project-by-project basis—depending on the model, pressure rating, features, and installation. Request a no-obligation quote; for hospital and studio projects, please use our wholesale/project inquiry form.

Common Mistakes When Buying a Chamber

• Over-specifying ATA: 3.0 ATA sounds high, but it's only necessary for medical indications—and comes with added weight, costs, and regulatory requirements.
• Check structural integrity and access requirements in advance: 400–700 kg and door widths determine feasibility. Clarify these details before placing an order.
• Save on oxygen equipment: The mask and concentrator determine the session’s efficiency—cutting corners here compromises the entire chamber.
• Don't underestimate delivery times: Custom-made items take weeks. If you want to open a business, plan backward from your target date.
• Making medical claims: Advertising that promises healing effects is legally risky. Focus your messaging on recovery, performance, and experience.

Frequently Asked Questions

Hard-shell or soft-shell—which is better?

It depends on the application. Soft-shell (approx. 1.2–1.5 ATA) is portable and more affordable, making it ideal for home use and beginners. Hard-shell (2.0–2.4, optionally 3.0 ATA) is pressure-stable, durable, and the right choice for studios, clinics, and longevity centers.

Which ATA pressure setting do I need?

For wellness and recovery, 1.3–2.0 ATA is standard; for demanding settings, 2.4 ATA is standard. 3.0 ATA is reserved for medical applications with the appropriate certification and under medical supervision.

Do I need a CE mark for medical devices?

Only if you operate the chamber as a medical device (e.g., for billing purposes). Many wellness and recovery facility operators deliberately use 2.0-ATA chambers without making any medical claims. It depends on your business model.

What are the space requirements?

Key factors include floor and ceiling load-bearing capacity (400–700 kg depending on the pressure level), door width (modular models fit through openings of approximately 80 cm), as well as fire safety and oxygen handling. A certified chamber is the key safety measure in this regard.

How long does delivery take?

Since each chamber is custom-made (manufactured in Istanbul, among other locations), you should allow about 8 to 12 weeks. Delivery, installation, training, and annual maintenance are included.

How much does a hyperbaric oxygen chamber cost?

Since each chamber is custom-configured, there is no list price—we provide a project-specific quote based on the model, pressure rating, features, and installation. Request a quote with no obligation.

Conclusion

Choosing the right hyperbaric oxygen chamber isn’t a matter of ordering from a catalog—it’s a matter of configuration: first, clarify the intended use and business model; then determine the ATA rating, construction type, format, and certification—and consider structural requirements, access, and delivery time from the very beginning. If you plan this carefully, a ProReset chamber will provide a premium recovery experience that clearly sets you apart from the competition.

Request a consultation and quote now → We’ll guide you every step of the way, from model selection to final installation—including training and maintenance.