You provide the design.
We provide the equipment.
Younix® is a modular strength system from a workshop near Naples. One system replaces an entire range of equipment and requires around 5 m². Upon request, it is finished by hand — permanently, on five components, as a unique piece.
We provide design offices, developers, and operators with documentation that is virtually non-existent for this category of equipment. Free of charge, with no obligation — and no commission.
No money flows in either direction.
A planner who earns a share of a product's profits is no longer independent from their client. That is why we do not offer commissions. The exchange works differently.
You get
We get
No exclusivity clause. No obligation to purchase. You can use the documents and never hear from us again.
The figures that belong in the plans.
Guidelines for the early planning phase. You will receive the binding values for your configuration with the project-specific data sheet.
Around 5 m² of floor space
Approximately 2.5 × 2.0 m of usable training area, including room to move.
Ceiling height from 270 cm
For the pull-up bar at full extension height.
Over 250 exercises
Dual adjustable cable stacks with 60 kg of real pulling force on each side, 35 height positions.
Stainless steel instead of paint
Stainless steel front bars, antimicrobial powder coating, Dyneema® cables from Gottifredi Maffioli.
1,500 kg frame load
Manufacturer specification for the load on the frame. Floor load and floor construction are clarified on a project-specific basis.
No electronics
No motor, no display, no power connection, no subscription. Nothing that will no longer be supported after five years.
We clarify the floor load, mounting, access dimensions, and floor construction on a project-specific basis and in writing. Request free of charge.
What you are weighing up against.
Four paths lead from the same requirement. We call them by name, because your client will call them by name anyway.
Fixed paths of motion, large floor space, designed for a catalog.
Free cable pull feeling, around 5 m², designed as a piece of furniture.
Subscription, motor, screen. Software determines how long the equipment remains usable.
No electronics, no ongoing costs, real weight instead of simulated resistance.
Solid steel, little design, no service in the DACH region.
Italian design plus delivery, installation, and warranty processing by us.
The most common path — and the one where the space remains unplanned in the end.
The documents cost nothing. You can plan now and decide later.
Five components. One signature.
Custom Art is not a film or a sticker. It is a permanent, hand-applied finish in gallery quality, executed in the workshop in Pompeii — on the equipment that is trained on every day.
Every design is created individually, made to order, and will not be repeated. From graphic graffiti to fine line drawings.
The versions shown are examples provided by the manufacturer. Each version is created individually and will not be repeated.
If the design comes from you
You provide the design or design direction. The copyright remains with you; you assure us that you have the necessary rights.
We check with the manufacturer whether and how it can be produced, and confirm feasibility, the additional cost, and the deadline in writing — before providing a quote.
You approve the design before production begins. Custom Art is a one-off piece, so the deposit is non-refundable.
The design is applied by hand in Pompeii, followed by transport, installation, and commissioning by us.
A car. A suit. An espresso machine.
In Italy, they are all measured by the same standard — not only whether they work, but how they look while doing so.
Fitness equipment has been designed exclusively for performance for decades. No one asked what a rack looks like when you apply this standard. Younix® asked the question — and Custom Art is the answer.
Not for every room. For one.
Custom Art is created for clients for whom the training room is not a storage room for equipment, but part of the design. Each piece is made to order. No series, no stock, no repetition.
From graffiti to fine lines
The range is not limited by a catalog, but by what can be done by hand. No templates, no stencils, no printing.
A piece that only exists once
Anyone who has seen a design before has seen it in another project. There will not be a second one — yours included.
Manhattan
40°45′N · 73°59′W · PRIVATE RESIDENCE
The same design applied by hand, created in Pompeii — in the living space for which it was made.
Napoli
40°51′N · 14°16′E · PRIVATE RESIDENCE
Where the idea was born. The equipment stands by the window, not in the basement — which says pretty much everything about the standard.
One room or forty.
The same configuration, the same area, the same installation logic — whether once or in series across an entire building.
Architecture and interior design
Private residences, penthouses, conversions. We provide the dimensions early enough so that they fit into the design rather than after.
Project developers and branded residences
Amenity spaces that must carry the sales brochure. One system per unit or a shared space in the building.
Wellness consulting and hospitality
Equipment planning for spa and gym spaces that must be fully functional on limited space. Also for operators with multiple properties.
Yacht and maritime projects
Only upon request and after a technical review. We clarify mounting, flooring, material approvals, and corrosion protection before every quote — see below.
How the system works in the room.
Three short clips: the system in use, production in Italy, and a conversation with the manufacturer.
If you have to explain the equipment to a client, video is faster than any data sheet.
Original audio in English, German subtitles.
Where we are not the right supplier.
Under 5 m². Then part of the system will stand in the room without being usable. We tell you this beforehand.
A deadline of less than eight weeks. Custom production from Italy takes 8 to 14 weeks plus transport and installation planning. If you need a shorter deadline, we are not the right choice.
If you need a price list. Younix® is exclusively sold through configuration and consultation, not from a price list. We provide prices during our conversation once the configuration, area, and deadline have been clarified — not before, and not even for accessories.
Maritime projects without a technical preliminary review. Equipment for use on board has different requirements for mounting, material approvals, and corrosion protection than equipment in a living space. We will honestly tell you what needs to be checked before we provide a quote — and if the requirements cannot be met, we will tell you that too.
If none of this applies, it is worth having a conversation. You will receive the documents anyway.
What planning offices ask first.
How much does the planning package cost?+
Do you pay a referral commission?+
Why are there no prices on the page?+
How binding is a delivery date?+
Who owns the images from the photography program?+
Who owns the design we create?+
Is the system also available multiple times for one building?+
What about yachts and maritime projects?+
Who delivers and installs?+
Tell us what you are planning.
We will get back to you within 24 hours on business days with the documents — and include the 2D/3D planning of your room right away.
Prefer to speak directly? beratung@kraftathlet.de · Response to technical inquiries within 24 hours on business days. More about the system: Younix® Custom Art and Younix® Cable Rack.
* The warranty applies to the frame of the system. Different periods apply to pulleys, blocks, guides and bearings, as well as to pads. You will receive the full terms and conditions with the quote. Statutory warranty rights remain unaffected and are free of charge.
Information on area, room height, pulling force and load are manufacturer specifications and guidelines for the early planning phase. We will confirm binding values for each configuration project-specifically and in writing. The installations mentioned and Custom Art versions shown are manufacturer references.
Younix® is owned or registered trademark of Mr. Umberto Avino. Dyneema® is a registered trademark of Avient Corporation. Gottifredi Maffioli is a brand of Gottifredi Maffioli S.p.A.
Sanyulo OÜ t/a Kraftathlet · Tornimäe tn 3 // 5 // 7, 10145 Tallinn, Estonia · Registry 16743370 · VAT EE102619836